********Picture Is Generic**********

Hello, Up for bid is a Hydraulic Roller Cam for an originally equip 19??- Present Oldsmobile. This is a stock billet regrind cam good for street/strip, and will work well for a 455 or larger cubic inch set-up. Use with carb or mass air induction. If you are not familiar with the regrind process, you could think of it as coping a key. You have the master template which provides the lobe profile for the slave product. The regrind is done by a company that has been serving many speed shops in my area for years, and will have no runs. The Cam is a small circle based Cam for added stroke clearance to avoid rod bolt grinding, if needed, and can be used with the stock distributor gear for roller. The Cam will provide a nice rumle with good increase in the mid power band.The specs. and applications are as followed:

Grind Number # HR-276-Olds

Valve Setting:

IN./Hyd.

EX./Hyd.

RPM Operating Range:

2000 to 6000

Duration:

Advertised IN./276 EX./286

@.050" IN./220 EX./234

Valve Lift:

W/1.6 Rocker: IN./.492 EX./.512

Lobe Sep. Angle: 112

Applications: 8:5:1 CR, Intake, Headers,
2000 Stall or Manual, 3:73 Gears or lower.

The cam will be shipped sealed, and with a cam card. I accept PayPal, Money Orders, and Cashers Check. (Sorry No COD's or Personal Checks).
The item will be shipped when payment clears, and their is a 7 day return policy upon delivery. Please e-mail me within 72 hours of sale to confirm payment method, and shipping details. Thank You for looking. Good Luck, and Happy Bidding!! (If you have any questions please ask before bidding.)

* Whenever you change to a higher rocker arm ratio be sure to check valve to piston clearance as always.
** If using a high performance fuel pump it is advised to use a bronze tip fuel pump pushrod.

The cam will be shipped sealed, and with a cam card. I accept PayPal, Money Orders, and Cashers Check. (Sorry No COD's or Personal Checks). All international bidders please emial before bidding, and after the sale wil have to pay all customs tax associated with the item when received The item will be shipped when payment clears, and their is a 7 day return policy upon delivery. Please e-mail me within 72 hours of sale to confirm payment, and shipping details. Thank You for looking. Good Luck, and Happy Bidding!!

If you have any question please e-mail me before bidding a utilitycomponents@yahoo.comThanks!!

***!!I have Cams for the following applications!!***;

Chevrolet

454 Big Block: Hyd. & HR ( very rare so when you see and need it… get it!)

350 Small Block: Hyd. & HR

4.3 V6: Hyd. & HR

2.8 V6: Hyd. & HR

250 Inline 6: Hyd.

300 Inline 6: Hyd.

Ford

352 - 428 Big Block: Hyd.

351 Small Block: Hyd. & HR

302 Small Block: Hyd. & HR

3.8 V6: HR

200 Inline 6: Hyd.

Dodge

318 - 340 Small Block: Hyd. & HR

3.9 Dodge: HR

Buick

215 - 350 Small Block: Hyd.

231 Grand Nation V6: HR

Pontiac

301 Small Block: Hyd.

Oldsmobile

350 Small Block: Hyd. & HR

Cadillac

4.1 Hyd. & HR